News

Keep abreast of Honsun's news and industry news

Check category

Inspection standard for tempered glass cover

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2019-07-29 10:48
  • Views:

(Summary description)Inspection standard for tempered glass cover:1) Scratches and dark lines: 8-15 mm in length allowed 2 places within 50 mm. Length less than 8 mm is allowed 4 places, within 50 mm; Length greater than 15 mm is not allowed.2) Surface is smooth, there is no other difference in the glass, no bubbles, mottles, lines, wavy lines, fog spots, rainbows and other bad...

Inspection standard for tempered glass cover

(Summary description)Inspection standard for tempered glass cover:1) Scratches and dark lines: 8-15 mm in length allowed 2 places within 50 mm. Length less than 8 mm is allowed 4 places, within 50 mm; Length greater than 15 mm is not allowed.2) Surface is smooth, there is no other difference in the glass, no bubbles, mottles, lines, wavy lines, fog spots, rainbows and other bad...

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2019-07-29 10:48
  • Views:
Information

Inspection standard for tempered glass cover:

1) Scratches and dark lines: 8-15 mm in length allowed 2 places within 50 mm. Length less than 8 mm is allowed 4 places, within 50 mm; Length greater than 15 mm is not allowed.

2) Surface is smooth, there is no other difference in the glass, no bubbles, mottles, lines, wavy lines, fog spots, rainbows and other bad

3) Edges should be bright, no oil pollution and other adhesives, no deformation, burn marks,.

Keloids, no outcrop, wave, imprint and other phenomena, no obvious hairline in the weld, no loosening of the steel ring, no sound by hand.

4) Good cooperation with the pot body, do not appear stuck or loose; The glass lid should not fall off when the product is at a 45 degree Angle.

5) After the tempered glass is smashed, the distribution of the broken particles is even, without shards of sharp strip shape, the length of the shards shall not exceed 75mm.

Scan the QR code to read on your phone

Next: None
Next: None

Hotline

Address: NO.28 XIAOXIN ROAD,HAIAN DEVELOPMENT ZONE,HAIAN,NANTONG,JIANGSU,CHINA.

Contact:Mr.JI SHUNHONG   Tel: 0086-513-88860108

Phone:+86 13906277905   Fax: 0086-513-88855309

​E-mail: haianjsh@126.com

ewm

Copyright © NANTONG HONSUN COOKWARE MANUFACTURING CO.,LTD

苏ICP备10206161号      Powered by www.300.cn